Audio Technica PRO42 Boundary Microphone

£51.02 £58.67 inc vat

Audio Technica PRO42 Boundary Microphone

The Audio Technica PRO 42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

Highlights: PRO42 Microphone

Very low-profile design for minimum visibility

Wide-range condenser element with low-mass diaphragm for superior performance

Uniform polar pattern for maximum rejection of unwanted sounds

Rugged design and construction

25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

SPECIFICATIONS

ELEMENT	Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN	Half-cardioid (cardioid in hemisphere above mounting surface)

FREQUENCY RESPONSE	70-14,000 Hz

OPEN CIRCUIT SENSITIVITY	-38 dB (12.5 mV) re 1V at 1 Pa

IMPEDANCE	100 ohms

MAXIMUM INPUT SOUND LEVEL	134 dB SPL, 1 kHz at 1% T.H.D.

DYNAMIC RANGE (typical)	105 dB, 1 kHz at Max SPL

SIGNAL-TO-NOISE RATIO	65 dB, 1 kHz at 1 Pa

PHANTOM POWER REQUIREMENTS	9-52V DC, 2 mA typical

WEIGHT	1.2 oz (35 g)

DIMENSIONS	1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height

OUTPUT CONNECTOR	3-pin XLRM-type on cable

CABLE	25' (7.6 m) long, permanently attached