Bookmark and Share
AT4033ASM MicrophoneClick to enlarge product image
AT4033ASM Microphone

Audio Techncia AT4033 Side Address Microphone

  • KA_AT4033ASM
  • AT4033aSM
  • Not available
  • Normally delivered within 1-2 working Days
  • No reviews yet

AUDIO-TECHNICA

£390.00

£325.00 exc. VAT

Add to Cart

Add to Wishlist

Audio Technica AT4033 ASM Microphone

The side-address AT4033aSM offers low-noise symmetrical transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.

 

  • A strong up-front presence characterizes the sonic signature of this versatile pro-audio classic
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined nickel-plated brass acoustic element baffle provides enhanced element stability and optimal sensitivity
  • The 2-micron-thick vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Floating-construction capsule assembly provides isolation from noise and vibration
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation

 

AT4033aSM Spcifcations; 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 128 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 3.2 mA typical
  • Weight: 13.4 oz (380 g)
  • Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
 
 
  • *
  • *
  • *
  • *
  • Send to Friend