- You are here
- Products
- Recording and PA Equipment
- Audio Technica Microphones
- Lavalier Microphones
- Audio Technica ES943C Cardioid Condenser Lavalier Microphone
Audio Technica ES943C Cardioid Condenser Lavalier Microphone

Audio Technica ES943C Cardioid Condenser Lavalier Microphone
- ES943
- Not available
- Out of stock
- No reviews yet
Audio Technica ES943C Cardioid Condenser Lavalier Microphone
The ES943C is intended to be worn on the clothing for excellent, unobtrusive sound pickup. The microphone's wide-range capability ensures clean, accurate reproduction with high intelligibility for speakers, singers and other performers. Its low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations.
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Small size and excellent response provide crisp, full-sounding voice pickup
- Available interchangeable elements permit angle of acceptance from 100º to 360º
- 55" (1.4 m) permanently attached miniature cable connects to AT8538 power module via TA3F-type connector
- Requires 11V to 52V DC phantom power
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- RoHS compliant - free from all substances specified in the EU directive on hazardous substances
- Element: Fixed-charge back plate, permanentlypolarized condenser
- Polar Pattern: Cardioid
- FrequencyResponse: 30-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -40dB (10.0 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- MaximumInput Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
- DynamicRange: 109 dB, 1 kHz at Max SPL
- Signal toNoise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom PowerRequiremens: 11-52V DC, 2 mA typical
- Switch: Flat,roll-off
- Cable: 1.4 m (55") long (permanentlyattached to microphone), 2.2 mm (0.09") diameter, 2-conductor shieldedcable, terminated with TA3F-type connector
- Accessories: AT8110foam windscreen; AT8460 clothing clip; AT8538 power module; belt clip