Bookmark and Share
Audio Technica AT4040 Microphone
Audio Technica AT4040 Microphone

Audio Technica AT4040 Condenser Microphone

  • AT4040SM
  • Not available
  • Usually Delivered in 1-2 Working Days
  • No reviews yet

Audio Technica

£467.10

£389.25 exc. VAT

Add to Cart

Add to Wishlist

Audio Technica AT4040 Condenser Microphone

The Audio Technica AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the Audio Technica AT4040 Condenser Microphone offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems.

The Audio Technica AT4040 Condenser Microphone's low-noise circuitry is symmetrical and transformer less, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shock mount.

Highlights

  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz hi-pass filter and 10 dB pad

 

Audio Technica AT4040 Condenser Microphone
Element Externally-polarized (DC bias) condenser
Polar Pattern Cardioid
Frequency Response 20-20,000 Hz
Low Frequency Roll-Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -32 dB (25.1 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
Noise 12 dB SPL
Dynamic Range (typical) 133 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48V DC, 4.2 mA typical
Switches Flat, roll-off;
10 dB pad (nominal)
Weight 12.7 oz (360 g)
Dimensions 6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Furnished AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
Audio-Technica Case Style R1
  • *
  • *
  • *
  • *
  • Send to Friend